PLEX server within AMP

Edwin · 25 April 2024 13:55

Is it posible to make a PLEX server within AMP?
If i read it well PLEX can be installed headless on rasb & Ubun.

gist.github.com

https://gist.github.com/stephendarling/37ef2fbba41389971eb4a12ca1392e37

UbuntuPlexServer.md

# Ubuntu Plex Server (headless)
This gist walks through how to configure Plex Media Server on an Ubuntu 16.04 Server headless install. Through the rest of this tutorial, the server will be referred to as *SERVER*. 
## Assumptions
- The *SERVER* is configured with SSH access, either via local credentials, ssh-keypair or some other federated identity
- The *SERVER* is connected to the same LAN as all required data sources (if your storage is not on the same box, e.g. NAS)
## Configure static IP address, netmask, gateway and dns-nameservers
You don't want the IP address of this *SERVER* (or any server) to change. Since it will be accessed only via internal IP address you can set that here. 
**NOTE**: If you change the CIDR block on your network you will need to update the static IP address of the *SERVER* here or switch the `static` method to `dhcp` and remove the `address` line. If you forget to do this the *SERVER* may be inaccessible. 

```

This file has been truncated. show original

https://howtohifi.com/how-to-install-your-plex-server-on-a-raspberry-pi-4-headless-edition/

system · 25 May 2024 13:56

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.